AXIOMTEK eBOX800-511-FL Series, User Manual

Page: 33 / 85

eBOX800-511-FL-FL Series u
ser’s Manual
Jumper & Connector Settings
25
3.3.2 Ethernet Port (M12 X-Code 8 pos Female)
Connectable via a M12 X-CODE LAN connector, the eBOX800-511-FL may be equipped with
a high performance Plug and Play Ethernet interface which is fully compliant with IEEE 802.3
standard.
Please refer to detailed pin assignment listed below:
3.3.3 USB Port (M12 A-Code 8 pos Male)
The USB is a Universal Serial Bus (compliant with USB 2.0 (480 Mbps)) connector on the rear
I/O. It is commonly used for installing USB peripherals such as keyboard, mouse, scanner, etc.
3.3.4 DC Power Jack Connector (M12 A-Code 5 pos Male)
Pins Signals Pins Signals
L1 MDI0P L5 MDI3P
L2 MDI0N L6 MDI3N
L3 MDI1P L7 MDI2N
L4 MDI1N L8 MDI2P
Pins Signals Pins Signals
1 USB VCC (+5V level) 5 USB VCC (+5V level)
2 USB #0_D- 6 USB #1_D-
3 USB #0_D+ 7 USB #1_D+
4 GND 8 GND
Pins Signals
1 9~36V
2 9~36V
3 GND
4 GND
5 Earth Ground