AXIOMTEK eBOX800-511-FL Series, User Manual

Page: 30 / 85

eBOX800-511-FL-FL Series u
ser’s Manual
Jumper & Connector Settings
22
3.2.1 Restore BIOS Optimal Defaults (JP2)
Put jumper clip to pin 2-3 for a few seconds then move it back to pin 1-2. Doing this procedure
can restore BIOS optimal defaults.
3.2.2 Auto Power On (JP3)
If JP3 is enabled for power input, the system will be automatically power on without pressing
soft power button. If JP3 is disabled for power input, it is necessary to manually press soft
power button to power on the system.
Function Setting
Normal (Default) 1-2 close
Restore BIOS optimal defaults 2-3 close
Function Setting
Disable auto power on 1-2 close
Enable auto power on (Default) 2-3 close