AXIOMTEK eBOX640-521-FL Series, User Manual

Page: 17 / 74

eBOX640-521-FL Series U
ser’s Manual
Hardware Installation
9
SECTION 2
HARDWARE INSTALLATION
The eBOX640-521-FL is convenient for your various hardware configurations, such as HDD
(Hard Disk Drive), SSD (Solid State Drive), Long-DIMM or PCI Express Mini Card modules.
Section 2 will show how to install the hardware.
2.1 Installation of the CPU Processor
Step 1 Turn off the system, and unplug the power cord.
Step 2 Locate the four screws on the top heatsink used to fasten the heatsink
to the chassis.
Step 3 Loosen these screws to remove the top heatsink.
Step 4 Remove the warning label and disengage load lever.
 Disengage the load lever by pushing its hook down and then pulling it slightly outward
 Rotate the load lever to the open position at approximately 135°.

Rotate the load plate to the open position at approximately 150°.
【
Note
】
Apply pressure to corner with the right-hand thumb when opening or
closing the load lever - otherwise the lever will bounce back (as a
mouse trap does) causing bent contacts.