AXIOMTEK eBOX560-900-FL-EU, User Manual

Page: 36 / 38

eBOX560-900-FL Series U
ser’s Manual
28 Jumper setting & connector
3.3.4 Micro USB 2.0 On-The-Go Connector (CN7)
USB On-The-Go, often abbreviated USB OTG, is a specification that allows USB devices
such as digital audio players or mobile phones to act as a host, allowing other USB
devices like a USB flash drive, mouse, or keyboard to be attached to them. Unlike
conventional USB systems, USB OTG systems can drop the hosting role and act as normal
USB devices when attached to another host.
3.3.5 Ethernet Ports (CN8)
The eBOX560-900-FL comes with two RJ-45 connectors; LAN1 (NVIDIA
®
JETSON™ TX2)
and LAN2 (Intel
®
I210-IT). Ethernet connection can be established by plugging one end of the
Ethernet cable into this RJ-45 connector and the other end (phone jack) to a 1000/100/10
Base-T hub.
Pin Signal
1 USB_5V_Power
2 D-
3 D+
4 ID
5 GND
Pin 1000 Base-T 100/10 Base-T Description
L1
BI_DA+ TX+
Bidirectional or Transmit Data+
L2
BI_DA- TX-
Bidirectional or Transmit Data-
L3
BI_DB+ RX+
Bidirectional or Receive Data+
L4
BI_DC+ N.C.
Bidirectional or Not Connected
L5 BI_DC- N.C.
Bidirectional or Not Connected
L6 BI_DB- RX-
Bidirectional or Receive Data-
L7 BI_DD+ N.C.
Bidirectional or Not Connected
L8 BI_DD- N.C.
Bidirectional or Not Connected
A
Active Link LED (Yellow)
Off: No link
Blinking: Data activity detected
B
Speed LED
1000: Orange
100/10: OFF/Green