AXIOMTEK eBOX560-900-FL-EU, User Manual

Page: 38 / 38

eBOX560-900-FL Series U
ser’s Manual
30 Jumper setting & connector
3.3.9 Digital I/O Connector (CN14)
The eBOX560-900-FL supports one 8-Channel digital I/O connector by option.
The digital I/O is controlled via software programming.
3.2.10 Debug Port Connector (JP1)
The JP1 is UART interface (UART Port0) for debug port when developing software.
3.3.11 Force Recovery Mode (SW1)
It will make NVIDIA
®
JETSON
™ TX2 to force recovery mode when push SW1.
3.3.12 CMOS Battery Interface (BAT1)
This connector is for CMOS battery interface..
Pin Signal Pin Signal
1 DIO01 2 DIO08
3 DIO02 4 DIO07
5 DIO03 6 DIO06
7 DIO04 8 DIO05
9 +5V 10 GND
Pin Signal
1 +5V
2 +3.3V
3 TX
4 RX
5 RTS#
6 CTS#
7 GND
Push Button Description
SW1 Force Recovery Mode
Pin Signal
1 +3.3V
2 GND