AXIOMTEK CAPA110, User Manual

Page: 18 / 71

CAPA110/111 AMD Embedded G-Series Processor Capa Board with LVDS
Board Layout and Pin Assignments
2.3.9 Audio Output Selection (JP13)
2.3.10 Auto Power On (JP15)
Note: This function is similar to the feature of power on after power failure, which is
controlled by hardware circuitry instead of BIOS.
Function Setting
Function Setting
Single Board Computer
distronik GmbH
https://www.distronik.de
The COM1 port has +5V level power capability on DCD and +12V level on RI by setting
this jumper. When COM1 is set to +5V or +12V level, please make sure the
communication mode is RS-232 (see section 2.3.4).
Power: Set COM1 pin 1/CN8 pin 1 to +5V level 1-3 close
Data: Set COM1 pin 1/CN8 pin 1 to DCD (Default) 3-5 close
Power: Set COM1 pin 9/CN8 pin 8 to +12V level 2-4 close
Data: Set COM1 pin 9/CN8 pin 8 to RI (Default) 4-6 close
The COM3 port has +5V level power capability on DCD and +12V on RI by setting this
jumper.
Power: Set CN7 pin 1 to +5V level 1-3 close
Data: Set CN7 pin 1 to DCD (Default) 3-5 close
Power: Set CN7 pin 8 to +12V level 2-4 close
Data: Set CN7 pin 8 to RI (Default) 4-6 close
The COM2 port has +5V level power capability on DCD and +12V level on RI by setting
this jumper.
Power: Set CN9 pin 1 to +5V level 1-3 close
Data: Set CN9 pin 1 to DCD (Default) 3-5 close
Power: Set CN9 pin 8 to +12V level 2-4 close
Data: Set CN9 pin 8 to RI (Default) 4-6 close
The COM4 port has +5V level power capability on DCD and +12V level on RI by setting
this jumper.
Power: Set CN7 pin 11 to +5V level 1-3 close
Data: Set CN7 pin 11 to DCD (Default) 3-5 close
Power: Set CN7 pin 18 to +12V level 2-4 close
Data: Set CN7 pin 18 to RI (Default) 4-6 close
11