AXIOMTEK CAPA110, User Manual

Page: 16 / 71

CAPA110/111 AMD Embedded G-Series Processor Capa Board with LVDS
Board Layout and Pin Assignments
2.3.1 Restore BIOS Optimal Defaults (JP1)
1
2
3
2.3.2 LVDS Voltage Selection (JP2 and JP16)
2.3.3 CompactFlash™ Voltage Selection (JP5)
2.3.4 COM1 RS-232/422/485 Mode Setting (JP6, JP9, JP10)
Function Setting
Function JP2 Setting
Function JP16 Setting
Function Setting
Function Setting
Single Board Computer
distronik GmbH
https://www.distronik.de
Jumper is a small component consisting of jumper clip and jumper pins. Install jumper clip on 2
jumper pins to close. And remove jumper clip from 2 jumper pins to open. Below illustration
shows how to set up jumper.
Properly configure jumper settings on the CAPA110/111 to meet your application purpose.
Below you can find a summary table of all jumpers and onboard default settings.
JP1
JP2
JP5
Restore BIOS Optimal Defaults
Default: Normal Operation
LVDS Voltage Selection
Default: +3.3V
CompactFlash™ Voltage Selection
Default: +3.3V
1-2 close
1-2 close
1-2 close
JP6 1-2 close
COM1 RS-232/422/485 Mode Setting
JP9 3-5, 4-6 close
JP10
JP7
JP8
COM1 Data/Power Selection
Default: RS-232 Data
(CAPA111)
CN8 Data/Power Selection
Default: RS-232 Data
(CAPA110)
COM3 Data/Power Selection
Default: RS-232 Data
COM2 Data/Power Selection
3-5, 4-6 close
COM1 Pin 1: DCD 3-5 close
COM1 Pin 9: RI 4-6 close
CN8 Pin 1: DCD 3-5 close
CN8 Pin 8: RI 4-6 close
CN7 Pin 1: DCD 3-5 close
CN7 Pin 8: RI 4-6 close
CN9 Pin 1: DCD 3-5 close
Default: RS-232 Data
CN9 Pin 8: RI 4-6 close
JP12
JP13
JP15
JP16
(Option)
COM4 Data/Power Selection
Default: RS-232 Data
Audio Output Selection
Default: Line Out
Auto Power On
Default: Disable
LVDS Voltage Selection
Default: +12V
CN7 Pin 11: DCD 3-5 close
CN7 Pin 18: RI 4-6 close
1-3, 2-4 close
1-2 close
1-2 close
9
Default: RS-232
JP11