UMAX090690. Version: 1.2 Preliminary Documentation
– May Be Subject To Change
21-37
5. ECU SETPOINTS ACCESSED WITH ELECTRONIC ASSISTANT
Many setpoints have been referenced throughout this manual. This section describes in detail each
setpoint, their defaults and ranges. For more information on how each setpoint is used, refer to the
relevant section of the user manual.
5.1.
Network Setpoints
The Network function block is defined in Section 4. Please refer there for detailed information
about how all these setpoints are used.
Screen Capture of Default Network Setpoints
Name
Range
Default Value
ECU Address
0…253
128
ECU Instance
0…6
0; 1
st
Instance
Table 5
– Default Network Setpoints
5.2.
Common CAN Setpoints
The Common CAN function block Controls the CAN parameters,
Baud Rate
,
Slew Rate
, and
Auto-Baud Rate
setting.
Screen Capture of Common Control Setpoints
