UMAX090690. Version: 1.2 Preliminary Documentation
– May Be Subject To Change
12-37
3.2.
Name, Address and Software ID
J1939 Name
The battery charger ECU has the following defaults for the J1939 NAME. The user should refer to
the SAE J1939/81 standard for more information on these parameters and their ranges.
Arbitrary Address Capable Yes
Industry Group
0, Global
Vehicle System Instance
0
Vehicle System
0, Non-specific system
Function
141, Axiomatic Battery Charger
Function Instance
8, Axiomatic AX090690, Battery
Charger
ECU Instance
0, First Instance
Manufacture Code
162, Axiomatic Technologies
Corporation
Identity Number
Variable, uniquely assigned during
factory programming for each ECU
The ECU Instance is a configurable setpoint associated with the NAME. Changing this value will
allow multiple ECUs of this type to be distinguishable by other ECUs (including the Electronic
Assistant) when they are all connected on the same network.
ECU Address
The default value of this setpoint is 128 (0x80), which is the preferred starting address for self-
configurable ECUs as set by the SAE in J1939 tables B3 to B7. The EA will allow the selection of
any address between 0 to 253, and
it is the user's responsibility to select an address that
complies with the standard
. The user must also be aware that since the unit is arbitrary address
capable, if another ECU with a higher priority NAME contends for the selected address, the battery
charger will continue select the next highest address until it finds one that it can claim. See
J1939/81 for more details about address claiming.
