UM AX032200 Version 1.0 46-46
6. TECHNICAL SPECIFICATIONS
Specifications are indicative and subject to change. Actual performance will vary depending on the application and operating conditions. Users
should satisfy themselves that the product is suitable for use in the intended application. All our products carry a limited warranty against defects in
material and workmanship. Please refer to our Warranty, Application Approvals/Limitations and Return Materials Process as described
https://www.axiomatic.com/service/.
Power
Power Supply Input - Nominal
12 V or 24 Vdc nominal; 8
…36 Vdc
The minimum allowable supply voltage for the power pin is 7 Vdc.
Surge Protection
Meets the surge requirements of SAE J1445
Reverse Polarity Protection
Provided up to 60V
Undervoltage Protection
Provided at 5V
Overvoltage Protection
Provided at 38V
Input
Input
1 ignition signal input
0 to +Vps
Optional input configuration as one digital input with 10K pull-up or pull-down
0 to +Vps amplitude
Outputs
Digital Outputs
2 digital outputs (up to 4A sourcing)
High Side
Current sensing, grounded load
Overcurrent protected against shorts to GND or +Supply
Digital On/Off: sourcing from power supply or off
Load at supply voltage must not draw more than 4A.
Control Software
Software Platform
Pre-programmed with standard logic.
General Specifications
Memory
TMS570LS0714; 32-bit, 1024 Kbytes Flash Program Memory
CAN Port
1 CAN (SAE J1939)
Quiescent Current Draw
122.50 mA @12Vdc; 71.80 mA @ 24Vdc Typical
Operating Conditions
-40 to 125
C (-40 to 257
F)
Weight
0.15 lb. (0.068 kg) preliminary
Protection Rating
IP67
Vibration
MIL-STD-202G, Test 204D and 214A (Sine and Random)
10 g peak (Sine); 7.86 Grms peak (Random)
Shock
MIL-STD-202G, Test 213B, 50 g
Enclosure and Dimensions
Molded Enclosure, integral connector
Nylon 6/6, 30% glass
Ultrasonically welded
3.47 x 2.75 x 1.31 inches (88.2 x 70.0 x 33.3 mm)
L x W x H including integral connector
Refer to Installation Instructions.
Electrical Connections
Integral TE Deutsch 8 pin receptacle (P/N: DT04-08PA)
18 AWG wire is recommended.
For pinout, refer to Installation Instructions.
Mating Plug Kit
A mating plug kit is available. Ordering P/N:
AX070112 i
s comprised of 1 DT06-
08SA, 1 W8S, 8 0462-201-16141, and 3 114017.
User Interface, Reflashing
Axiomatic Electronic Assistant
AX070502
Notes:
CANopen® is a registered community trademark of CAN in Automation e.V.
