Operation instructions | MIE 8-00 | MIE 16-00 | MIE 32-00 | MIE 4-02 | MIE 8-02 | MIE 3-02 | MIE 6-02
Page 36 of 68
BA_MIE.pdf | Technical improvements, changes in design, printing- and other errors reserved. | 2022-05-31
3.5.2.
MIE 8-00, MIE 16-00 and MIE 32-00 (DVB-T)
Click on PHASE 3, to modify the setting of the modulators.
Configuration of the modulators
Select a modulator from MODULATOR 1 to MODULATOR 6 on the left.
Make the required changes.
Click SAVE for each modulator.
Only then the changes will be saved,
otherwise the changes will be lost.
Parameters:
Common Output Level
The
Common Output Level
option include a general attenuation of all modulator outputs. The
highest output level is reached with a setting of 20 dB, the lowest level with a setting of 0 dB.
Norm
In this selection field, you can set the norm for the output channel spacing.
Note: Changing the norm works now according to following rules:
•
CCIR-->Australia : all modulators forced to 7MHz
•
Australia-->CCIR : all modulators forced to 8MHz, however with following exception: low
channels S2-S20 are 7MHz only, so those remain in 7MHz
Output Channel
Each of the modulators can be set to any output channel.
No output channel may be selected
more than once!
Select a
modulator
