Operation instructions | MIE 8-00 | MIE 16-00 | MIE 32-00 | MIE 4-02 | MIE 8-02 | MIE 3-02 | MIE 6-02
Page 34 of 68
BA_MIE.pdf | Technical improvements, changes in design, printing- and other errors reserved. | 2022-05-31
3.4.10.
EIT configuration
If the SPTS/MPTS input streams do not contain all the EIT information (Event Information Table), then the EIT can be provided from
a alternative EIT source.
Click on ADVANCED OPTIONS in PHASE 2.
Open the EIT option.
Select under
Alternative EIT Source
:
•
Input:
First select the input stream that will provide the EIT.
•
Output/Modulator
: Select an output modulator so that it passes the EIT for all.
•
Add EIT to every service
: In the
Default
setting, each output modulator provides only the EIT information of the
programmes that the output modulator contains. Select an output modulator so it provides the EIT for all programmes.
•
Another device for mutual EIT
: If there is another MIE device on the same network, EIT information from another MIE can
be added to this device (changes to the configuration are transferred to the other device within one minute). This function
has the following requirements:
•
The alternative EIT source must contain EIT for both MIE devices.
•
The MIE devices must be able to communicate with each other via the Ethernet port "Control".
•
Both MIE devices must have the same user password.