Table of contents
Safety instructions:
•
The installation of the device and repair work on the device must be carried out only by a professional in accordance
with the applicable VDE directives. In case of incorrect installation, no liability is assumed.
•
Never open the device. There are no parts to be maintained by the user inside the device, however, lethal voltages
are present. This also applies to cleaning the device or working on the connections.
•
Use only the mains cable enclosed to the device. Never replace any parts or make any modifications to the mains
cable. Otherwise, there is a risk of death.
•
If you intend not to use the device for a longer period of time, we recommend you to completely disconnect the
device from the mains for safety reasons and for saving energy by pulling out the mains plug.
•
Let the device adjust to the room temperature before commissioning, in particular if condensation is present on the
device, or if it was exposed to large temperature fluctuations.
•
The device must be operated only in moderate climate.
•
The device must be operated only in dry rooms. In damp rooms or outdoors, there is a risk of short-circuits
(attention: risk of fire) or electrical shocks (attention: risk of death).
•
The device shall not be exposed to dripping or splashing. Do not place objects filled with liquids such as vases on
the device.
•
Plan the mounting or installation location such that you can easily reach the mains plug and interrupt the electric
circuit in dangerous situations. Select the mounting or installation location such that children cannot play near the
device and its connections without supervision. The mounting or installation location must allow a safe
installation of all connected cables. Power supply cables and supply cables must not be damaged or squeezed
by any objects.
•
Operate the device only on a flat, firm surface and protect it against unintentional movements.
•
Never expose the device to direct solar irradiation and avoid direct vicinity of heat sources (e.g. heaters, other
electrical appliances, fireplace, etc.). It must be always ensured that devices with cooling elements or ventilation
slots are not covered or obstructed.
•
Ensure generous air circulation around the device. This will prevent possible damage to device and risk of fire due
to overheating. It must be always ensured that cables are not located near heat sources (e.g. heaters, other
electrical appliances, fireplace, etc.). The unit must be wall mounted with at least 5 cm clearance along the 4
sides. For 19-inch rack mounting, there must be at least 5 cm clearance in front of and behind the unit.
•
In particular, the warranty and liability shall be excluded for the consequences of incorrect use, in case of incorrect
modifications or repair work carried out by the customer. Use the device only as described in the operating
instructions and in particular according to the state-of-the-art.
•
The DVB-C/T distribution network must be installed and connected to the equipotential bonding according to EN
60728-11.
Herewith AXING AG declares that the marked products comply with the valid
guidelines. You can call up the complete EU declaration of conformity for download
by entering the article in the search field at
WEEE Nr. DE26869279 | Electrical and electronic components must not be
disposed of as residual waste, it must be disposed of separately.
