12
S
Y
S
TEM C
OMPONENT
S
PRIMAR
Y INSPECTION
INS
TALLA
TION
OPERA
TION
PRIMING
C
ONTR
OLLER
C
OMMISSIONING
MAINTENANCE
REV03121080011217
O
VER
VIEW
Controller
C
ONTR
OLLER
SMART Solar Controller
The digital, programmable timer offers a variety of weekly programs. It is equipped with a replaceable Lithium CR2032
battery for to retain the program and memory backup.
Adjust Clock
Press and hold “CLOCK” and then press sequentially “DAY”, “HOUR” and “MIN” button to adjust clock of timer to correct
date, hour, and minute.
Programming the Timer
There are eight (8) weekly timers with on/off times possible. At least one needs to be set for automatic operation.
1.
Press the “TIMER” button. LCD screen will switch to the first timer (1
ON
)
2.
Press “DAY” as often as required to select any of the 15 combinations of days that suit your application
3.
Press “HOUR” and “MIN” respectively to set desired start time for
1
ON
4.
Press “TIMER” to switch to
1
OFF
5.
Press “DAY” as often as required to select the same combinations of days as in step 2 (must be consistent)
6.
Press “HOUR” and “MIN” respectively to set desired stop time for
1
OFF
7.
Repeat procedure (step 1 through 6) if you would like to set several timers
8.
When finished programming press “CLOCK”
To review the program press “TIMER” button repeatedly to go through all eight (8)
timers.
To activate the timer program, make sure to press “MANUAL” button, the display indicated you are in “AUTO” mode. Please
call AXI International with any questions.
