7
S
Y
S
TEM C
OMPONENT
S
PRIMAR
Y INSPECTION
OPERA
TION
PRIMING
C
ONTR
OLLER
MAINTENANCE
REV0303HC300010318
C
OMMISSIONING
O
VER
VIEW
Commissioning/Initial Start-Up
Preparations
Before operating the MTC, we recommend determining the amount of contaminants, free water, and sludge in the tank.
AXI International provides a variety of tank sampling equipment, including Sampling Pumps, tubing and bottles, as well as
Tank Samplers (“Bacon Bomb”) – please see our FS Fluid Sampling line of products. Please make sure the samples are
taken from the bottom of the tank (in the deepest spot). Use a stick with “Kolor Kut” paste on the end, reach through the top
of the tank, and place the end of the stick all the way at the bottom of the tank. Kolor Kut paste will show the water level in
the tank, and indicate how much water, and sludge, will have to be removed. Call AXI International for further information
on other fuel sampling equipment.
General Tank Cleaning Procedure
In Fine Filtration Mode, the MTC system is continuously restoring, reconditioning, and returning the fuel back to the tank.
Fine Filtration mode will continuously remove particles as small as 1 micron, utilizing high efficiency spin-on filters.
We always recommend keeping a “before” and “after” bottom tank sample for “show & tell” purposes to demonstrate the
improvement of fuel color, clarity, and opacity.
Summary of Contents for MTC HC-300
Page 23: ...NOTES...
