18
O
VER
VIEW
S
Y
S
TEM C
OMPONENT
S
PRIMAR
Y INSPECTION
OPERA
TION
PRIMING
C
ONTR
OLLER
C
OMMISSIONING
REV0303HC300010318
MAINTENANCE
Safety Notes
• The MTC Pump is designed to be used with diesel fuel and oils only. The pump is NOT designed for gasoline, alcohol
or other explosive or corrosive liquids.
• Please contact us if you are not sure if the liquid you are intending to polish and clean is compatible with the MTC
system.
• Biocides are extremely toxic and may enter the body through the skin. It is recommended to use adequate protection
and avoid skin contact with biocide-treated fuels and oil.
• Disposal of tank sludge, water and filter elements should be done in accordance with Federal, State and Local
regulations. These materials need to be treated as chemical waste.
! WARNING ! DO NOT USE WITH GASOLINE. This System is not meant for use with gasoline nor with other
flammable liquids having a flash point less than 100°F (38°C). Use with gasoline or any flammable liquids
at a temperature exceeding their flash point, presents explosion and fire hazards.
! WARNING ! Care must be taken not to operate the pump with either the suction (inlet) or discharge (outlet)
lines closed or obstructed. If the pump is allowed to run without fuel serious damage may occur. Only run
the system when you are able to supervise it. Unattended Operating of the MTC is NOT recommended.
! WARNING ! Some fuels may have been treated with biocides. Biocides are extremely toxic and may enter
the body through the skin. Use adequate protection and avoid contact.
Note: Disposal of fuel, associated waste, and filters must be in accordance with all applicable Federal, State, and Local
rules, laws, standards, and regulations.
Summary of Contents for MTC HC-300
Page 23: ...NOTES...
