Axent AXENT.ONE PLUS User Manual Download Page 34

32

OPERATION WITH REMOTE CONTROL

GUARANTEE

AXENT LIMITED WARRANTY

A three-year limited warranty applies to all AXENT products purchased on or after May 1, 2019. All 
products purchased on or before April 30, 2019 OR purchased for use in a commercial or hospitality 
setting on any date are backed by AXENT’s one-year limited warranty.
1. AXENT warrants that its products are free from defects caused by defective material and faulty 

workmanship for a period of three-year from the date of purchase by the original purchaser. The lim-
ited warranty is to the original purchaser only. The limited warranty is not transferable to any third par-
ty. Proof of purchase showing both original ownership and purchase date is required for any warranty 
claim. The limited warranty applies to all products sold by authorized dealers in the United States and 
Canada. This warranty is limited to parts only and AXENT is not responsible for any installation labor 
charges, removal charges, installation, or other incidental or consequential cost. 

2. AXENT’s sole and maximum liability for breach of its warranties herein is limited to the obligation, at AXENT’s 

sole discretion to repair, replace, or make appropriate adjustments to bring the product back to normal operating 
function. AXENT reserves the right to inspection of the product and verification of normal residential usage con-
ditions during the warranty period before warranty claims are handled. In no event shall AXENT or Seller be liable 
to Buyer for consequential, incidental, economic, or special damages stemming from any breach of express or 
implied warranty.

3. Purchaser shall comply with the following procedures in connection with the warranty claim:

-

AXENT is notified in writing by Purchaser within thirty (30) days after discovery of defects;

-

Purchaser obtains a Return Authorization from AXENT prior to returning any defective product to AXENT;

-

The defective products are returned to AXENT, all shipping charges prepaid by Purchaser(provided however, that if upon 

examination by AXENT, it determines that the products are entitled to warranty, then AXENT shall be responsible for shipping 

charge to and from AXENT ’s facility).

-

The defective products are received by AXENT for adjustment no later than fifteen (15) days following the last day of the war-

ranty period; and

-

AXENT’s examination of such goods shall disclose that such defects or failures have not been caused by misuse, abuse, ne-

glect, improper installation or application, repair, alteration, damage by rain, fire or casualty or by accident or negligence in use, 

storage, transportation or handling. 

4. This warranty does not apply to the following items:

-

Damage or loss sustained in a fire, earthquake, storm or any natural disaster etc.…

-

Damage or loss resulting from any unreasonable use, misuse, abuse, negligence or improper care, improper cleaning or main-

taining of the product.

-

Damage or loss as a resulting from the use of in-tank toilet cleaners.

-

Damage or loss resulting from any sediments or foreign matter contained in the water system.

-

Damage or loss from improper installation, harsh environment, improper removal and water pressure in excess of 80PSI.

-

Damage or loss resulting from electrical surges, lightning strikes or other acts which are not considered normal or the fault of 

AXENT.

-

Damage or loss resulting from normal wear and tear, such as gloss reduction or dulling, scratching or fading over time due to 

normal use, cleaning practices, water or atmospheric conditions including but not limited to: bleach, alkali, acid cleaners, dry 

powdered cleaners or any other abrasive cleaning agents or abrasive cleaning tools or aids.

-

The use of any product in a manner outside of the product instructions / owner’s manuals.

-

AXENT shall not be liable for any failure caused by chloramines in the public treated waters or cleaners containing chlorine 

(calcium hypochlorite). Please note that use of high concentrate chlorine or chlorine related products can damage fittings. This 

damage can cause leakage resulting in property damage.

5. AXENT’S OBLIGATION TO HONOR THESE WARRANTIES IS CONTINGENT UPON AXENT’S RECEIPT OF 

PAYMENT IN FULL FOR THE GOODS ENTITLED TO THIS WARRANTY. AXENT DISCLAIMS ALL OTHER 
WARRANTIES, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING, WITHOUT LIMITATION, THE IMPLIED 
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. SELLER HAS NOT 
AUTHORIZED ANYONE TO MAKE ANY REPRESENTATION OR WARRANTY OTHER THAN AS PROVIDED 
ABOVE. THE FOREGOING STATES THE ENTIRE WARRANTY LIABILITY OF SELLER.

To obtain warranty service, contact AXENT’s service team through your dealer or plumbing contractor, or via the 
points of contact below:

Mailing Address: Attn. Customer Service Department 3 Musick, Irvine, CA 92618

E-mail: [email protected]

Phone: 1-800-769-4857

Summary of Contents for AXENT.ONE PLUS





































Reviews: