17
OPERATION WITH MAIN
LEVEL 2 > AUTO DRY SETTING
Factory setting:
OFF
2
LEVEL 2 is activated,
Press and hold
the Multifunction dial.
Turn
it
counter clockwise
.
■
-
ON
One time short «beep»
■
-
OFF
Two times short «beep»
When the Auto Dry setting is ON, the Dry function will be started after pressing the Multifunction dial to
stop Rear or Front wash.
LEVEL 2 > SYSTEM RESET
2
LEVEL 2 is activated,
Pull
the Multifunction dial.
Turn
it
counter clockwise
to start System Reset.
■
-
All settings are reset to factory defaults. This will be followed by a short
«beep».
STAND-BY MODE
Press and hold
the Multifunction dial
until
ambient light off to activate
the Stand-by mode.
■
-
Slap the toilet rear cover to deactivate Stand-by mode.
In Stand-by mode, the intelligent toilet will remain powered, but electronic functions will be disabled.
PAIRING TO DIAL
Cut off the power of the intelligent toilet and wait for 30 seconds and then
apply power to it.
After three times short «beep», the pairing is started by
pressing
Multi-
function dial
repeatedly
within 20 seconds
until
hearing three times long
«beep» from the intelligent toilet, which means pairing successful.
Pairing has originally been done in the factory. It is necessary only after you replaced your dial.
Summary of Contents for AXENT.ONE PLUS
Page 1: ...USER MANUAL AXENT ONE PLUS...
Page 2: ......
Page 13: ...11 OPERATION WITH MAIN OPERATION DIAGRAM QUICK START ONE ONE REGULAR USE ONE ONE...
Page 35: ......
