Axel AX3000 80WMS, User Manual

Page: 82 / 136

Using the AX3000
74
AX3000 Model 80WMS - User's Manual
Two methods are available to lock a screen:
- Automatically : when the terminal is idle (keyboard or screen) for a
certain time, the AX300 blacks out the monitor display. The display is
automatically restored as soon as a key is pressed. A dialog box allowing
the screen to be unlocked after password is entered is displayed.
- Manually : the <Ctrl><Alt><S> keystroke allows the screen to be locked
immediately.
An unlock-screen dialog box is displayed. Two operations are possible:
- Entering the password to unlock the screen. Two passwords can be used:
the screen saver password and the set-up password (see Chapter 3.2.8).
- Resetting the AX3000. If the password is forgotten, the only way is
selecting the [Shutdown] button. After power-cycling it, the AX3000
administrator will be able to modify or remove the screen saver password.
Note
: For the highest level of security we recommend setting the terminals ‘Set-
Up’ password. (See Chapter 3.2.8)
4.4.3 - USB Port Redirection Function
Press <Ctrl><Alt><U> to display a dialog box where the USB Port Redirection
can be started/stopped per device.
The following shows a typical box:
Note : this box is only displayed if the USB Port Redirection is enabled within the
MultiPoint session profile.
All eligible devices are listed with the information about the current redirection
status. The user can tick (x) or untick (.) a device to start or stop the redirection.
Note : this box may be also displayed when the MultiPoint session is established