Axel AX3000 80WMS, User Manual

Page: 30 / 136

Interactive Set-Up
22
AX3000 Model 80WMS - User's Manual
Other DNS settings are available through the " DNS Parameters " option. The
dialog box below is displayed:
Parameters are:
- DNS Search Domains : a DNS domain is used to resolve a server name
or to register the terminal name (see Appendix A.4).
Note : if the 'Default DNS Domain' is selected in the "DHCP Option List",
the 'Default Domain' parameter cannot be accessed.
- DNS Server Update: sets the method used for publishing the terminal
name:
- No : the terminal name is not published.
- By the DHCP server (available only if the DHCP protocol is
enabled): the terminal name is registered by the DHCP server.
Requirement: the DDNS function (Dynamic DNS) must be
supported by the DHCP server. See Appendix A.4.3.
- By the terminal : the terminal updates the DNS server. In this case
the parameter "Action on Error" controls the terminal’s behavior in
the event of an error during the DNS server update (see Appendix
A.4.3).
c) Router Management
A router is either a special electronic device, or a suitably configured computer,
which enables data to be sent across two or more distinct physical networks.
One router can be nominated as the 'default router' and then used to access any
network. Use of a default router simplifies site network administration. The
default router is only identified by its IP address.