Axel AX3000 80WMS, User Manual

Page: 37 / 136

Interactive Set-Up
AX3000 Model 80WMS - User's Manual
29
For a USB touch screen this parameter is disabled
-
Settings : the box depends on the touch screen type (serial or USB):
Serial Touch Screen: USB Touch Screen:
Type (serial touch screens only): select the touch screen manufacturer:
ELOTouch, MicroTouch or Liyitec.
Automatic Detection (serial touch screens only): automatically obtain the set-
up parameters from the touch-screen. To detect these settings the Axel terminal
scans a range of baud rates and data formats. When these match the touch
screen settings the serial line parameters are updated.
Calibration : display a dialog box for calibration. (Follow the instructions and
touch the screen where '
*
's are displayed).
Events sent (USB touch screens only): two modes are available:
- Click Only : a 'mouse click' event is sent when the screen is touched
- All : in addition of the click event, 'mouse motion' events are sent until the
screen is untouched.
Transpose X/Y Axis (USB touch screens only): select 'yes' or 'no'.
Double Touch Accuracy Range (pixels) : this parameter defines a zone size
which allows double-click to be emulated. A double-click event will be sent when
the screen is touched twice (in a period less than 0.5 seconds) and when the
two impacts are located in the same zone (less than X pixels).
Note : the touch screen functions properly only after the calibration has been
performed.
After calibration touch screen events are automatically remapped to 'left click'