Axcera 6476B Operation Manual Download Page 28

 

REFERENCE 

6476B BROADBAND BOOSTER  

 

 

 

MATERIAL RETURN PROCEDURE 

 

 

In order to efficiently handle equipment or components returned for 

repair or sent out on loan, Axcera requests that each returned item be 

accompanied by a Return Material Authorization Number (RMA#). 

 

To obtain an RMA follow the procedures below: 

 

 

Call Axcera Customer Service at 1-724-873-8100  

 

or FAX 1-724-873-8105 

 

 

A Service Engineer will provide you with an RMA# 

 

 

Write the RMA# on the packing list or in the case of 

repairs, a note describing the reason for return. Also, be  

sure to include contact information. 

 

 

Send ALL RMA items to the following address 

 

Axcera, LLC 

103 Freedom Drive P.O Box 525 

Lawrence, PA 15055-0525 

 

 

(

 TELEPHONE TECHNICAL SUPPORT 

 

Axcera currently provides free telephone technical support. When 

calling, be prepared to provide the following information: 

 

Transmitter model # AND Serial # 

 

Status of front panel LED’s (are any red LED’s on ?) 

 

Have a copy of your operation manual ready prior to calling 

 

Call 1-724-873-8100 and ask for technical support. 

 

 

 

Summary of Contents for 6476B




































Reviews: