Axcera 5720 Series, Manual

Page: 4 / 65

SYSTEM
Unpacking
Axcera certifies that upon leaving our facility all equipment
was undamaged and in proper working order. It is impera-
tive that all packages be inspected immediately when re-
ceived to verify that no damage occurred in transit to the
site.
· Inspect all packages for exterior damage and
make note of any dents, broken seals, or
other indications of improper handling.
· Carefully open each package and inspect the
contents for damage. Verify that all materi-
als are enclosed as listed on the packing slip.
Report any shortages to Axcera.
· In the event any in transit damage is discov-
ered report it to the carrier. Axcera is not
responsible for damage done by the carrier.
· If the equipment is not going to be installed
immediately, return all items to their original
packaging for safe storage.
· Save all packing material for future use. If
equipment is ever removed from the site, the
original packaging will ensure the safe trans-
port of it. Keep at least one copy of all docu-
mentation including this manual at the site in
a safe place.
Installation
All 5720 series products are designed for simple installation
with comprehensive instructions. Expensive test equipment
is not required to keep a system operational, installation,
and set up. Prior to installing the product review the check-
list that follows.
4