AXA JetTENDER 250, User Manual

Page: 19 / 27

6.11 Fuel System Check
WARNING. Pressurised fuel system. Inspect system for leaks at scheduled service intervals. All elements of
the fuel system function under pressure (4 bar). The system remains pressurised after engine is switched
off. Extreme care must be taken when removing connectors during filter change. Wear eye protection. No
naked flames.
6.12 Routine Maintenance
To ensure long service life and to maintain the tender in a safe and reliable condition please follow these routine
maintenance instructions. AXA cannot accept any responsibility for damage or injury resulting from incorrect
maintenance or improper adjustment carried out by the owner.
1.Wash tender regularly with fresh water to remove salt deposits.
2. Check engine oil level (refer to section
Oil Level Check in this handbook).
3.Check coolant level.
4. Flush open loop cooling system.
5. Apply a good quality marine grease containing Teflon (e.g. Quicksilver 101) to all control cables both under the
helm and at the pump.
6. Check bilges for water ingress, oil or fuel contamination and clean if necessary.
7. Lightly grease the extending running light pole base using white grease or similar.
8. Check condition of the anodes.
9.Loss of tube pressure over 24 hours is not unusual. Temperature and atmospheric pressure will affect tube
pressures. Check pressures regularly.
10. For boats used in tropical environments, the frequency of the routine maintenance should be increased
accordingly.
6.13 Servicing
Refer to Product Maintenance Chart
For parts and accessories please contact your AXA authorized dealer
19