AWG I Operating manual I Fittings I
Inductors FD Z2 and Z4
MAINTENANCE
M1088B10 I Rev. 01-02/20
ENGLISH
37 / 40
7
MAINTENANCE
7.1
Inspection and maintenance
Apart from the visual inspection and cleaning of the AWG Inductors, no
regular maintenance work is required.
7.2 Repair
Any repair work on the AWG Inductors may only be performed by the
AWG Fittings GmbH customer service or by an authorised specialist
workshop.
If you need technical support, please contact our Service Centre:
AWG Fittings GmbH
Service Centre
D-89177 Ballendorf
Telephone: +49 (0) 73 40 / 91 88 98 880
Email: [email protected]
We will accept devices in need of repair or maintenance, discuss with
you the quickest and cheapest solution, create cost estimates, take
care of the execution of the repair work and are at your disposal for
any questions.
7.3 Disposal
Observe the local regulations regarding proper waste recycling or dis-
posal.
Materials
Nozzle body, setting sleeve: Aluminium, black anodised
Internal parts:
Polyoxymethylen (POM) plastic
Seals: NBR
Base stand:
Cast aluminium, powder-coated in red
Storz adapters:
Aluminium, anodised
