Sharpening wedge
After using the log splitters for some time, sharpen the wedge of the log splitter using a fine-
toothed file and smooth any burrs or crushed area along the cutting edge.
TROUBLESHOOTING
Problem Cause
Solution
Motor does not
start.
-
No current in the socket.
-
Switch or capacitor defective
-
Check the mains fuse.
-
Have checked by electrician.
When the opera-
tion handles are
pushed down the
wedge does not
move.
-
Low hydraulic oil level.
-
Check and refill hydraulic oil.
Log splitter does
not work while
motor is running.
-
Valve is not opened owing to
the connection parts loosen-
ing.
-
Control levers or connection
parts bent.
-
Low hydraulic oil level.
-
Check and tighten the parts.
-
Repair the bent parts.
-
Check and refill hydraulic oil.
Hydraulic hoses
heat up.
- Low oil level.
-
Wrong valve setting.
-
Broken pump.
-
Check and refill hydraulic oil.
-
Adjust the valve.
-
Change the pump.
Log splitter works
with abnormal
vibration and
noise.
-
Low hydraulic oil level.
-
Check and refill hydraulic oil.
