Cybersecurity Recommendations
22
The account lock feature is enabled by default, and we recommend you to keep
it on to guarantee the account security. If an attacker attempts to log in with the
wrong password several times, the corresponding account and the source IP
address will be locked.
4.
Enable Account Lock
We suggest you to change default HTTP and other service ports into any set of
numbers between 1024~65535, reducing the risk of outsiders being able to guess
which ports you are using.
5.
Change Default HTTP and Other Service Ports
We suggest you to enable HTTPS, so that you visit Web service through a secure
communication channel.
6.
Enable HTTPS
We suggest you to enable whitelist function to prevent everyone, except those
with specified IP addresses, from accessing the system. Therefore, please be
sure to add your computer’s IP address and the accompanying equipment’s IP
address to the whitelist.
7.
Enable Whitelist
We recommend you to bind the IP and MAC address of the gateway to the
equipment, thus reducing the risk of ARP spoofing.
8.
MAC Address Binding
According to business and management requirements, reasonably add users
and assign a minimum set of permissions to them.
9.
Assign Accounts and Privileges Reasonably
If not needed, it is recommended to turn off some services such as SNMP, SMTP,
UPnP, etc., to reduce risks.
If necessary, it is highly recommended that you use safe modes, including but
not limited to the following services:
10.
Disable Unnecessary Services and Choose Secure Modes
Due to the limited storage capacity of the equipment, the stored log is limited. If
13.
Network Log
12.
Secure Auditing
If your audio and video data contents are very important or sensitive, we
recommend that you use encrypted transmission function, to reduce the risk of
audio and video data being stolen during transmission.
Reminder: encrypted transmission will cause some loss in transmission efficiency.
11.
Audio and Video Encrypted Transmission
SNMP: Choose SNMP v3, and set up strong encryption passwords and
authentication passwords.
SMTP: Choose TLS to access mailbox server.
FTP: Choose SFTP, and set up strong passwords.
AP hotspot: Choose WPA2-PSK encryption mode, and set up strong
passwords.
Check online users: we suggest that you check online users regularly to
see if the device is logged in without authorization.
Check equipment log: By viewing the logs, you can know the IP addresses
that were used to log in to your devices and their key operations.
