Contact your local retailer or customer service center if the Device is abnormal.
Do not disassemble or repair the product by yourself. We will assume no
responsibility for any problems caused by unauthorized modifications,
disassembly or repair, incorrect installation or use, and overuse of certain
components.
All installation and operations shall conform to local electrical safety
regulations.
Turn off the power and disconnect the power cord immediately if there is water
or liquid falling into the Device. And contact your local retailer or customer
service center.
The power source shall conform to the requirement of the Safety Extra Low
Voltage (SELV) standard, and supply power with rated voltage which conforms
to Limited Power Source requirement according to IEC60950-1. Note that the
power supply requirement is subject to the device label.
Use the power adapter provided by legitimate manufacturers.
Do not connect several cameras to one power adapter. It may result in
overheat or fire if it exceeds the rated load.
Make sure that the power is off when you connect the cables, and install or
uninstall the Device.
Turn off the power and disconnect the power cord immediately if there is any
smoke, disgusting smell, or noise from the Device. And contact your local
retailer or customer service center.
Clean the enclosure with soft cloth. To remove the dirt, you can dip the soft
cloth in proper detergent, wring the soft cloth out, and then dry the enclosure
with soft cloth.
Do not use gasoline, paint thinner or other chemicals to clean the enclosure;
otherwise it might result in enclosure transfiguration or paint flake.
Read all the manuals included before using chemical cloth. Avoid long time
touch between the plastic or rubber material and the enclosure. It might result
in device damage and paint flake.
Power Requirements
Cleaning Requirements
Have certificates or experiences related to installation and maintenance of the
closed circuit television (CCTV).
Have certificates related to working at height.
Have basic knowledge and operation technique for low-voltage wiring and
low-voltage electronic circuit connection.
Have the ability to read and understand the manual.
Requirements for Installation and
Maintenance personnel
