7
Application Note 006
Control Tool Quick Start Guide
QUICK START GUIDE
ETHERTRONICS CONTROL TOOL
After launch the tool, the COM Port selection window is displayed. The default parameters on this window are correct, user does not need to change the serial
port parameters. User only needs to select the correct COM port from the combo box.
COM PORT SELECTION WINDOW
Once the button Set COM Port is clicked, the control tool will communicate with the ETH-LORA-M-AX-01 module to get the information about the module.
This will take up couples of seconds and the status will be displayed. If everything is OK, the main application form will be displayed. Otherwise the error will
be displayed.
WELCOME TAB
This welcome tab shows the name of the tool and as well as the version of the tool.
Figure 10
Figure 11
092419
