10
Application Note 006
Control Tool Quick Start Guide
LINK INFORMATION TAB
This tab is only for display purpose. When the demo is correctly launched, user can see the display of the RSSI/SNR, spreading factor and the frequency. To
modify the axes of the plot, please go to Configuration Tab and adjust the values inside the Plots Control panel.
If the demo is not launched, these plots will not be displayed.
LORA NETWORK TAB
This tab is used to modify the LoRa parameter of the modules. Once the button Set or Get is click, user need to wait until the status of the current operation is
displayed inside status text box.
If user modifies these parameters and wishes to save them even after the module reboots, user can store the new values inside the EEPROM of the module
using the button Save.
Figure 16
Figure 17
092419
