6.OSD - Patterns, Tours
6.OSD - Zones and Privacy Mask
PATTERNS
Pattern
Pattern records the user’s operation steps on
performing PTZ control and stores as a track. The
Speed Dome can record up to 4 tracks with max.
180 sec. each.
PATTERN NUMBER:
PROGRAM PATTERN:
RUN PATTERN:
CLEAR PATTERN:
EDIT PATTERN LABEL :
Selects the pattern number,
from 1 to 4
Starts recording the pattern
when selected. you can perfome PTZ movement for
recording and shall not exceed 180 sec. Press IRIS-
OPEN to save the track.
Starts the current pattern
Delete curretn pattern.
Sets the name for current
pattern.
PATTERN NUMBER 1
PROGRAM PATTERN
RUN PATTERN
CLEAR PATTERN
EDIT PATTERN LABEL
BACK
EXIT
ZONE
up to 8 zones
You can define the zones in the whole PT range up
to
with individual label. When the
display setting “Zone Label” is activated, the
label will be displayed on the operation screen.
The definition of the zones should not be
overlapped.
ZONES NUMBER:
SET LEFT LIMIT:
SET RIGHT LIMIT:
CLEAR ZONE:
EDIT ZONE LABEL :
Current zone selection
Left limit of the current zone
Right limit of the current zone
Delet the current zone
change the laben of current zone.
ZONES
ZONES NUMBER 1
SET LEFT LIMIT
SET RIGHT LIMIT
CLEAR ZONE
EDIT ZONE LABEL
BACK
EXIT
Some products may not be available in your country, please contact our distributor for more details
Some products may not be available in your country, please contact our distributor for more details
17
18
TIME RUNNING
You can set up the timer to start a function like
preset, tour or pattern. Each day can be set 4
action.
AUTO TRACKING
DAY
SUN
STATE
ON
START TIME 00:00
END TIME
00:00
SENSITIVE
LOW
TRACKING-ZOOM OFF
SET LEFT LIMIT
SET RIGHT LIMT
BACK
EXIT
AUTO TRACKING
Auto-Tracking can seach people or object with
high speed and low light performance.
DAY:
set current day
STATE: activate AUTO-TRACKING on this day
START TIME: set the time for activation
END TIME: set the time for stop the tracking
SENSITIVE: set the sensitivity for the detection
TRAKING ZOOM: activate auto-zoom
SET LIMIT: set the max. angle for
the tracking.
TIME RUNNING
DAY
SUN
TIME CHANNEL 1
START TIME 00:00
END TIME
00:00
RUNNING
NONE
BACK
EXIT
Clear the current preset
Start Auto Tracking, if the preset
is called.
For the current preset, you
can define a name which will be shon on the
operation screen once the preset is called. please
choose the preset number at first. The avaialbe
characters are: 0-9, A-Z, <,>,. and space.
CLEAR PRESET:
AUTO-TRACKING:
EDIT PRESET LABEL:
EDIT PRESET LABEL
LABEL
BACK
EXIT
：
ROOM 1
SCAN
SCAN NUMBER:
SCAN SPEED:
SET LEFT LIMIT:
SET RIGHT LIMIT:
CLEAR SCAN:
RUN SCAN:
EDIT SCAN LABEL:
The SCAN function moves the PTZ between 2-
predefined points in constant speed.The
following parameters can be set:
The Speed Dome
cruising speed between the
points.
defines the left point.
defines the right point
Delete the scan setting
starting the scan function
set the name for the scan
supports up to 4
scan.
SCAN
SCAN NUMBER 01
SCAN SPEED 63
SET LEFT LIMIT
SET RIGHT LIMIT
RUN SCAN
EDIT SCAN LABEL
BACK
EXIT
CLEAR SCAN
Tour
Tour is an auto-run through selected preset
points with definable pause time. A tour can
store up to 32 presets points.
TOUR DWELL:
TOUR PRESETS:
RUN TOUR:
pause time for every stop on the
preset points. selectable between 000-255(s).
press IRIS-OPEN Key on the
keyboard device to enter the preset point
selection. Move the joystick with up and down to
select the preset points by number and save the
setting with IRIS-OPEN key. with IRIS-CLOSE
key you can move to the previous selection. If a
select point has the value 0, all the following
presets points will be ignored.
Starts the tour and exit the OSD
menu.
EDIT TOUR
TOUR DWELL
001
00-00-00-00-00-00-00-00
00-00-00-00-00-00-00-00
00-00-00-00-00-00-00-00
00-00-00-00-00-00-00-00
RUN
TOUR
BACK
EXIT
