CAMERA SETTING
In camera setting menu, you can setup camera module
related settings. please note that depends on module’s
capability, some function may not available. please contact
your local sales representative for detailed information.
defines the speed when performing zoom
function.
Activate or deactivate the digital zoom
function of the camera module.
Select the Back Light Compensation mode,
improves the image when an object has strong back light.
Activates the Slow Shutter function
of the camera, which provides a higher light sensibility
in low-environment.
Activates the Wide Dynamic Range function, which
improves the image contrast when an object has very
strong light on background. Only available with camera
modules with WDR.
ZOOM SPEED:
DIGITAL ZOOM:
BLC MODE:
SLOW SHUTTER:
WDR:
OSD - Camera Setting
OSD - Preset, Scan
CAMERA SETTING
ZOOM SPEED
HIGH
DIGITAL ZOOM
ON
BLC MODE
OFF
SLOW SHUTTER
ON
LINE SYNC N/A
WDR MODE
N/A
ADVANCE SETTING 1
ADVANCE SETTING 2
BACK
EXIT
ADVANCE SETTING
2
AE MODE
AUTO
SHUTTER
N/A
IRIS
N/A
BRIGHT
N/A
WB MODE
AUTO
R GAIN
N/A
B GAIN
N/A
HI-RESOLUTION OFF
BACK
EXIT
ADVANCE SETTING 2
AE MODE:
WB MODE:
ALC, PLC:
Under the advanced setting, you can make
improvements to image quality due to different
environmental conditions.
Auto Exposure mode. Depends on the light
condition in the surveillance area, you can set the AE in
different modes and adjust the parameters, such as
shutter speed, iris factor and brightness for the best
image quality.
White balance mode, a image improvement
based on DSP processing. you can also adjust the Red-
Gain or Blue-Gain to change the color tone.
Average and Peak Level Control,
additional setting to WB function. only avialble with
dedicated camera modules.
FUNCTION SETTING
In function setting menu, you can define and activate
different PTZ funcitons, such as preset points, auto
scan, tours and Pattern. Presets and tour functions
can also be set or activated directly from keyboard
device without OSD. Please refer to the keyboard’s
manual for operation details.
Some products may not be available in your country, please contact our distributor for more details
Some products may not be available in your country, please contact our distributor for more details
15
ADVANCE SETTING1
IR CUT FILTER:
MAX GAIN:
EXPOSURE COMP:
Mirror:
Flip:
Enables the removal of Infrared Cutter
Filter (IRC), also known as “DAY/NIGHT” mode. with the
removal of IRC, the camera turns into Black/White mode and
has higher sensibility to low-light or IR-Light in the night.
Selectable between On, Off, Auto or Time. Only available
on camera module with IRC function.
improve the image quality in the Night modus
This mode fixes the shutter speed
of a short exposure.Configure the shutter speed of a long
exposure by setting the ratio with regards to a short
exposure with the exposure ratio parameter. Blocked-up
shadow correction is not performed in this mode.
This function reverses the camera horizontally.
This function turns the camera upside down.
FUNCTION SETTING
PRESETS
SCAN
PATTERNS
TOUR
ZONES
TIME RUNNING
AUTO-TRACKING
BACK
EXIT
ADVANCE SETTING
1
IR CUTTER FILTER
AUTO
IR CUT ON TIME N/A
IR CUT OFF TIME N/A
THRESHOLD 10dB
MAX GAIN
28dB
EXPOSURE COMP
OFF
MIRROR OFF
FLIP
OFF
NEXT
O
NEW PASSWORD : ******
ENABLE PASSWORD OFF
BACK
EXIT
LD PASSWORD : ******
CONF PASSWORD : ******
PASSWORD SETUP
TIME
00:00:00
DATE
01/01/01
DAY
MON
BACK
EXIT
CLOCK SETTING
Password setup
You can change password to access the OSD menu.
Default Password is 000000.
Clock setting
Some function like Auto-Tracking require the timer for
activation.
Time:
HH:MM:SS
DATE:
YY/MM/DD
DAY:
MON-SUN
ADVANCE SETTING
1
PS SCAN ON
STABLE ZOOM ON
DNR 00
BACK
EXIT
ADVANCE SETTING 1
These function are o
Activate Progressive Scan, can be combine
on the WDR mode.
This function is performing correction
using the Image Stabilizer function in accordance with
the zoom ratio, and smoothly zooming up to
approximately ×40 using a combination of the optical
zoom and digital zoom.
Set the 2D/3D
igital
oise
eduction.
PS SCAN:
STABLE ZOOM:
DNR:
D
N
R
nly available with the E-Serie
camera modules
PRESETS
P R E S E T N U M B E R
0 0 1
S E T P R E S E T
S H O W P R E S E T
C L E A R P R E S E T
A U TO - T R A C K I N G
O N
E D I T P R E S E T L A B E L
B A C K
E X I T
PRESETS:
PRESET NUMBER:
SET PRESET:
SHOW PRESET:
G65-70 Series supports up to
128 presets. The number can be selected from 0 to
128.
Defining the preset points directly in
OSD by entering this menu item and move the PTZ.
press IRIS-OPEN key on the keyboard to save. If the
preset is pointed within digital zoom, it will
automatically go back to max. optical zoom range in
order to provide the best image.
Moves to current preset point
