4
Avtek 1EVA10
Radio frequency/infrared remote control system with a 12V trigger
1. Features
• Compatible with all AVTEK electric projec-
tor screens
• Ready to use as soon as installed
• Connect your projector to the 12V trigger
output port to start your projector auto-
matically as soon as the screen is lowered
• Product includes: a controller, two wireless
receivers: a radio frequency (RF) receiver
and an infrared (IR) one, a manual switch
unit
3. Installation and setup
Important safety precautions
While installing the product, please make sure you follow all the applicable electrical standards and the following safety precautions:
• Before you start any (re)installation or maintenance work, always disconnect the product from the mains first.
• Use all appropriate electrical safety measures to protect electrical components of the product from damage by electrostatic discharge.
• Make sure that the electrical ground wire is correctly connected.
Operating the wall-mounted switch:
1. Press the desired direction button and release it within 1 second:
as soon as the button is released, the screen will start to be rolled
up or lowered (depending on the button pressed) until another
button is pressed: “UP”, “DOWN” or “STOP”.
2. Alternatively, press the desired direction button and keep
it pressed. The screen will start to be rolled up or lowered
(depending on the button pressed). Release the button when the
screen has reached the desired position. The screen will stop.
Cable labels and colours
Motor:
E: Earth - green/yellow
N: Neutral - blue
L: Up/down - black
R: Down/up - brown
Controller:
N: Neutral - blue
E: Earth - green/yellow
L: live wire - brown
12 V trigger:
NC: relay output
GND: ground
+12V: DC trigger
Wall-mounted switch:
+5V: Infrared transmitter power supply
IR: Infrared signal
U: Up/down – brown
S: Stop – green
D: Down/up – black
G: Neutral – blue
LED indicator light
„CODE” button
for channel setup
„UP” button
przycisk „w górę”
przycisk „w górę”
przycisk „stop”
przycisk „stop”
„DOWN” button
„DOWN” button
„STOP” button
„DOWN” button
Rj11
Rj12
IR reception sensor
Power input
Live wir
e
(electrical voltage pr
esent!)
Neutral wir
e
Neutral wir
e
Down
Up
Earth wir
e
Earth wir
e
motor
12 V trigger
Manual pulse
switch
IR transmitter
IR104
RF transmitter
RF101
EN
radio frequency
receiver
(RF)
infrared
receiver
(IR)
manual switch
unit
controller
2. Specification
Model
Power supply
Temperature
Range
Maximum load
Frequency
Operation mode
RF +
IR204
AC 230 V
50 Hz
-40°C ~ +85°C
RF ≥ 80 m
IR ≥ 8 m
≤ 300 W
RF 433.92 Hz
IR 38 kHz
Remote (IR, RF, 12VDC trigger)
Manual (wall-mounted manual switch)
Manual pulse
switch
IR
remote control
RF
remote control
