Installation Note
Temperature & Environment Monitoring...
Made Easy!
Relay Switch
AVTECH
AVTECH’s Relay Switch
turns on and off up to 4 electrical
devices. You may individually control each of the 4 relay
outputs separately.
Relay Switch Package Contents
•
One (1) Relay Switch
•
Two (2) mounting screws
Relay Switch
Front
Relay
Ports
Custom
Cord
Install Your Relay Switch
Do not use this sensor in hazardous (classified) locations or life safety applications.
Step 1: Mount your Relay Switch.
Mount your Relay Switch with screws through the flange holes, secure it with Velcro or
simply place it on a flat surface.
Step 2: Connect your Relay Switch to AVTECH’s Light Tower & Relay Adapter.
To use your sensor with Room Alert models 32E, 12E and 3E, you need AVTECH’s Light
Tower & Relay Adapter (LT-32-ADP), shown here.
Connect the Relay Switch’s built-in custom cable to the custom
port on the Light Tower & Relay Adapter.
For more information about AVTECH’s
Light Tower & Relay Adapter, please
see its Installation Note, visit
or contact your Product
Specialist.
To use your Relay Switch with the Room Alert 4E model, connect it directly to the Room
Alert 4E’s custom port.
