Page 4
Flood Sensor - Cable (RMA-F008-SEN & RMA-F024-SEN)
Sensor Features & Specifications
Environment Condition Monitored
Presence/absence of liquid
Type Of Sensor
Switch
Flood Detection Switch Port
Normal State
Closed (Liquid NOT detected)
Alarm State
Open (Liquid detected)
Cable Fault Detection Switch Port
Normal State
Closed (No cable fault)
Alarm State
Open (Cable fault)
Power Supply
AVTECH 5V power adapter
Sensor Cable Type
2-wire low-voltage speaker wire
Included
Yes
Length
25' (7.6 m)
Maximum Extendible Length
900' (274.3 m)
RJ-11 leader
Included
Yes, built-in
Length
25' (7.6 m)
Maximum Extendible Length
100' (30.5 m)
Flood Cable
Included
Yes
Length
8' (2.4 m), 24' (7.3 m) and custom lengths available
Compatible Products
Any Room Alert model
Previous Generation Flood Sensor Cable
In the previous generation of Flood Sensor Cable, the orange-twisted Flood Cable and
the RJ-11 leader are separate components that must be fitted together. To assemble the
previous generation Flood Sensor Cable:
• Connect the 4-pin custom jack
on the orange twisted Flood
Cable to the matching port on
the RJ-11 leader.
•
Screw the cover down on the plastic threads for a secure fit.
When the orange-twisted Flood Cable is disconnected from the RJ-11 leader cable, the
Cable Fault Detection port’s switch state will read as Open.
AVT-180309-2.0.0
