AVTECH Software, Inc.
Page 2
AVTECH.com
Light Tower w/Audio (ST-RYG-LTA)
Adjust Your Light Tower’s Audio Output
You may raise the volume on the Light Tower by unscrewing the top
cover by up to 1 1/2 turns. (Don’t unscrew it more than 1 1/2 turns or the
cover may come off.)
For maximum volume, you may rotate the center plug on the cover
approximately 180° and remove the plug.
In Room Alert’s web interface, you will see Audio 1 and Audio 2 as options for the Light
Tower. Please note that the current model has Audio 1 only. Audio 2 applies to a previous
model of the Light Tower w/Audio.
Extend Your Light Tower’s Custom Cable
With the 25'
Light Tower w/Audio Extension Cable
(ST-025G2-CAB), you may extend the length of your
Light Tower’s custom cable to better meet the needs of
your specific application.
To assemble, loosen the nut holding the custom cable to
the Light Tower and detach the cable. Then attach that
end of the custom cable to the matching jack on the
extension cable, tightening the nut to secure it. Finally,
attach the extension cable’s connector to the matching
jack on the Light Tower, tightening the nut to secure it.
Sensor Features & Specifications
Environment Condition Monitored
Type Of Sensor
LED & audio output
LEDs
Red, yellow, green
Audio
2.7 KHz +/- 50Hz oscillation frequency
Maximum intensity 95 dB at 3.3' (1 m)
Power Supply
Room Alert or Light Tower Adapter (LTA)
Sensor Cable Type
Custom cable
Included
Yes
Length
15'
Maximum Extendible Length
100'
Operating Temperature
-4° F to 122° F (-20° C to 50° C)
Maximum Operating Humidity
95% at 122°F (50°C) non-condensing
Compatible Products
Adapter
Light Tower & Relay Adapter (LTA)
Main Units
Room Alert 32S and 12S (LTA required)
Room Alert 32E, 12E and 3E (LTA required)
Room Alert 4E (no LTA required)
Center
Plug
Top
Cover
AVT-200610
