INSTALLATION
Step1: Find the screw on the camera, and remove it with the supplied wrench.
Then, remove the camera base as shown in
Figure 1
, and disassemble the camera to four parts as shown in
Figure 2
.
Figure 1
Figure 2
Step2: Locate where you want to install this camera (wall or ceiling), and drill holes on the wall or ceiling for securing the
bracket and routing the cables (if necessary).
Step3: Attach the bracket to the wall (or ceiling), and make sure the cables are routed and arranged properly in the bracket,
as shown in
Figure 3
.
Figure 3
Step4: Secure the bracket to the wall (or ceiling), as shown in
Figure 4
.
Figure 4
