Step5: Slightly adjust the camera lens to where it’s supposed to face, and replace Part 1 and Part 2 back, as shown in
Figure 5
and
Figure 6
.
Step6: Hold the camera lens and Part 1, rotate only Part 2 clockwise to the end, and replace the screw removed in Step1
back, as shown in
Figure 6
.
Figure 5
Figure 6
Step7: Power on your camera, and check the viewing angle on the PC.
Step8: Adjust the position, viewing angle, focal length and focus of the camera, if necessary.
For focal length and focus adjustment, please check
Figure 7
to know where to do.
Figure 7
