ALL PROGRAMMING COMMANDS
For more advanced programmers, a complete list of the available commands is given
below. These commands are described in detail in the “Programming Manual for -B
Instruments”. (Note: this manual also includes some commands that are not
implemented in this instrument. They can be ignored.)
Keyword
Parameter
Notes
OUTPut:
:[STATe]
<boolean value>
:PROTection
:TRIPped?
[query only]
[SOURce]:
:FREQuency
[:CW | FIXed]
<numeric value>
[SOURce]:
:PULSe
:PERiod
<numeric value>
:WIDTh
<numeric value>
:DCYCle
<numeric value>
:HOLD
WIDTh | DCYCle
:DELay
<numeric value>
:GATE
:TYPE
ASYNC | SYNC
:LEVel
HIgh | LOw
[SOURce]:
:VOLTage
[:LEVel]
[:IMMediate]
[:AMPLitude]
<numeric value> | EXTernal
:PROTection
:TRIPped?
[query only]
STATUS:
:OPERation
:[EVENt]?
[query only, always returns "0"]
:CONDition?
[query only, always returns "0"]
:ENABle
<numeric value>
[implemented but not useful]
:QUEStionable
:[EVENt]?
[query only, always returns "0"]
:CONDition?
[query only, always returns "0"]
:ENABle
<numeric value>
[implemented but not useful]
SYSTem:
:COMMunicate
:GPIB
:ADDRess
<numeric value>
:SERial
:CONTrol
:RTS
ON | IBFull | RFR
:[RECeive]
:BAUD
1200 | 2400 | 4800 | 9600 | 19200 | 38400 | 57600 | 115200
:ERRor
:[NEXT]?
[query only]
:COUNT?
[query only]
:VERSion?
[query only]
TRIGger:
32
