detail.
6. KEYPAD
.
Control Name
Function
MOVE
This moves the arrow pointer on the display.
CHANGE
This is used to enter the submenu, or to select the operating
mode, pointed to by the arrow pointer.
×10
If one of the adjustable numeric parameters is displayed, this
increases the setting by a factor of ten.
÷10
If one of the adjustable numeric parameters is displayed, this
decreases the setting by a factor of ten.
+/-
If one of the adjustable numeric parameters is displayed, and
this parameter can be both positive or negative, this changes the
sign of the parameter.
EXTRA FINE
This changes the step size of the ADJUST knob. In the extra-
fine mode, the step size is twenty times finer than in the normal
mode. This button switches between the two step sizes.
ADJUST
This large knob adjusts the value of any displayed numeric
adjustable values, such as frequency, pulse width, etc. The
adjust step size is set by the "EXTRA FINE" button.
When the main menu is displayed, this knob can be used to
move the arrow pointer.
16
Summary of Contents for AVP-AV-HV3-B
