Avtech AVP-AV-HV3-B, Instructions Manual

Page: 28 / 47

PROGRAMMING COMMANDS FOR -2CH UNITS
Units with the -2CHPP, -2CHPN, -2CHNN, and -2CHX options will have two sets of
programmable pulse widths, delays, and amplitudes. On these units, a channel
identifier should be appended to these commands, like so:
pulse:width1 1 ns (sets the CH1 pulse width to 1 ns)
pulse:width2 2 ns (sets the CH2 pulse width to 2 ns)
pulse:delay1 1 us (sets the CH1 delay to 1 us)
pulse:delay2 10 ns (sets the CH2 delay to 10 ns)
volt:ampl1 5 (sets the amplitude to +5 V)
volt:ampl2 -10 (sets the amplitude to -10 V)
If no channel identifier is used, “1” is assumed.
These commands will satisfy 90% of your programming needs.
ALL PROGRAMMING COMMANDS
For more advanced programmers, a complete list of the available commands is given
below. These commands are described in detail in the “Programming Manual for -B
Instruments”. (Note: this manual also includes some commands that are not
implemented in this instrument. They can be ignored.)
Keyword Parameter Notes
OUTPut:
:[STATe] <boolean value>
:PROTection
:TRIPped? [query only]
[SOURce]:
:FREQuency
[:CW | FIXed] <numeric value>
[SOURce]:
:PULSe
:PERiod <numeric value>
:WIDTh <numeric value>
:DCYCle <numeric value>
:HOLD WIDTh | DCYCle
:DELay <numeric value>
:GATE
:TYPE ASYNC | SYNC
:LEVel HIgh | LOw
[SOURce]:
:VOLTage
[:LEVel]
[:IMMediate]
[:AMPLitude] <numeric value> | EXTernal
:LOW <numeric value> | EXTernal [for -OT option only]
:PROTection
28