The load may be installed between these two strips, as shown in a side view:
The copper strips may be removed entirely, if the user wishes to construct their own
load attachment arrangement. If the copper strips are removed, the OUT and GROUND
signals may be accessed using the four high-current posts, which are terminated with
M6-1.0 internal threads. An M6-1.0x12 screw should be used to attach cabling to each
of the four posts. The inner two posts carry the OUT signal, and the outer two posts
carry the ground:
28
Narrow Copper Strip = OUT
Wide Copper Strip = GROUND
End View of AV-HLZA
Narrow Copper Strip = OUT
Wide Copper Strip = GROUND
Load Resistance
Side View of AV-HLZA
Plugs
Summary of Contents for AVOZ-E3-B
