REMOTE OPERATION
39
6.1.3. General Operation
Record
To record remotely at the same time for any event or alarm at the DVR side, click “
” or “
”
→
“
” to
go to the “Record Setting” page.
In the “Record Setting” page, you can set the following items:
Record
type
Hard disk overwriting
Pre- / post-alarm record time
Record time setting
Record
path
If “Manual” is checked, click “
” or “
” on the main control panel to start the manual recording
immediately, and the recordings will be saved in the specified location.
If “Motion” and / or “Alarm” are checked, the recording function will also be enabled at the remote side when
any event is triggered at the DVR side, and the recordings will be saved in the specified location.
Playback
To play a recording, click “
” or “
”, and select the “Record” tab or “Backup” tab. A list of all the
recordings will be shown by defaults, and you can also sort out the logs you want to speed up the search
time.