HARDWARE OVERVIEW
1
1. HARDWARE OVERVIEW
1.1 Front Panel
Note:
The functions on the front panel and rear panel may vary, depending on the mode you have.
1) LED indicators
Internet
The device is connected to Internet.
LAN
The device is connected to LAN.
Alarm
An alarm event occurs.
eSATA
An external disk array is connected.
This device is power-supplied.
Error
Any of the adapter, power and fan is abnormal.
2) Power ( )
Press to power on the device; press and hold for 3 seconds to power off the device.
3) Mouse port (
)
Insert a mouse for function operation.
4) USB port (
)
Insert a compatible USB flash drive for video backup.
Note:
For the compatible list of USB flash drives, please refer to “APPENDIX 1 COMPATIBLE USB FLASH
DRIVE LIST” at page 50.
5) HDD Indicators
Check the HDD indicator for each installed hard disk to ensure the hard disks work normally.
Color
Status
Meaning
--
No light
No hard disk is installed, or the installed hard disk is not detected. Please install a hard disk
or replace the installed hard disk, and try again.
Green
Always on
The installed hard disk is detected well.
Green
Flashing
Data reading / writing.
Red
Always on
The installed hard disk is failed. Please replace the installed hard disk, and try again.
Red
Flashing
Data building or recovering.
1.2 Rear Panel
1) HDMI
This port is used to connect the monitor which supports HDMI interface.
Note:
Direct connection to the monitor, which supports VGA or composite interface, is not supported.
Please prepare a converter in advance.
2) eSATA
(For selected models only)
This port is used to connect a storage device supporting eSATA interface; for instance, an external disk array.
Note:
Please purchase a disk array supporting Linux system to ensure your device works properly. For
the compatible list, please refer to “APPENDIX 5 DISK ARRAY COMPATIBLE LIST” at page 54.
Note:
If the disk array is not connected or detected well, check the mode of your disk array, or do a
reset default on your disk array and try again.