525Z
701_702_702a_801_EZ_setup_V1.0
Package Content
Insert Micro SD Card
PRODUCT OVERVIEW
Before starting to set up your camera, please make sure
items below in your box:
Standard package:
Camera
Bracket
I/O Terminal
Block
Selected models only:
RJ45 cable
CD Manual
Antenna
Adapter
Only selected models are equipped with a micro SD
card slot for local video recording.
The data originally saved in the micro SD card (if any) will
be removed after inserting it to the camera.
The camera doesn’t support hot-swapping. Please insert or
remove the micro SD card with power disconnected.
Card slot on the left
Card slot on the right
I/O Terminal Block
Assemble & Install
This camera supports external I/O device connection, and a 4-pin I/O terminal block is supplied with this camera for easy
connection.
Below shows which input on the I/O terminal block you should use for wiring when you want to connect an external device to this
camera.
Alarm Out
GND
Alarm In
GND
DC 5V Relay
DC 12V
Power Supply
Buzzer
COM
NC
NO
Magnetic Contact
4-pin I/O Terminal block
Example of Alarm Out Connection
d
1. Fasten the base of the bracket (the round one) to where
the camera is installed.
The distance between your camera and the location you
want to monitor should be 3 ~ 4 meters.
2. Assemble the bracket and the camera, and adjust the
viewing angle of the camera.
3.
(For wireless models only)
Fasten the antenna for wireless network connection.
4. Connect your camera to power, and check the LED status
indicators to make sure the camera is powered on.
