Avtech 4713218633538, Operation Manual

Page: 11 / 59

6
3. CAMERA CONFIGURATIONS
Users can further configure this network camera by accessing via Internet Explorer.
3.1 System configuration menu
Click “Config.” to enter the configuration page.
The functions are categorized into seven menus: Network, Camera, ONVIF, Trigger and General.

For details about “Network”, please refer to “3.2 Network” at page 8.

For details about “Camera”, please refer to “3.3 Camera” at page 13

For details about “ONVIF”, please refer to “3.4 ONVIF” at page 18.

For details about “Record”, please refer to “3.5 Record (For selected models only)” at page 19.

For details about “Storage”, please refer to “3.6 Storage (For selected models only)”’ at page 19.

For details about “Trigger”, please refer to “3.7 Trigger” at page 20.

For details about “General”, please refer to “3.8 General” at page 22.
Main Menu Sub-Menu Reference
Network Network
Configure network settings.
If your device supports EaZy Networking to quickly connect your device to the network, please
enable EaZy Networking here.
QoS Limit the data flow for live streaming.
DDNS Enter DDNS information when the network type is PPPOE or DHCP.
SNTP Synchronize your camera time with the networked computer systems.
FTP
Enter the FTP information for event notifications when “FTP” is chosen in “Trigger”
→
“Trigger”.
Mail Enter Email information for event notifications when “Email” is chosen in “Trigger”
→
“Trigger”.
SMS
Enter text messaging information for SMS notifications when “SMS” is chosen in “Trigger”
→
“Trigger”.
Filter Choose to permit or block the IP address(es) which can access this camera.
UpnP
*Suitable for Windows-based operating system.
Allow this camera to be detected among devices within the same network area for easy and
quick usage.
Bonjour
*Suitable for Apple Mac-based operating system.
Allow this camera to be detected among devices within the same network area for easy and
quick usage.
RTP
Set the parameters for video data transmission when you’re using multimedia other than web
browsers and Video Viewer for remote access.
SNMP* Configure SNMP to remotely manage network devices.
IEEE 802.1X*
The settings here enable the camera to access a network protected by 802.1X/EAPOL
(Extensible Authentication Protocol Over LAN).
Network Share
Assign a location in the LAN environment to save the snapshot of events when “Network
Share” is chosen in “Trigger”
→
“Snapshot”.
Network Failure Detection
Configure this camera to check the network connection of other device periodically, and send
notifications via Email or FTP for disconnection events.
Camera Camera
1. Rename the camera.
2. Change the place where the camera name is shown on the screen.
Video Adjust video-related settings in different video format.
ROI* Select a specific area to reinforce the image quality of that area.
Color Adjust the color performance.
Audio* Adjust the volume for sound picking.
Advanced Adjust the camera parameters if necessary.
ONVIF Event
This function is used to integrate the functions of event detection when this camera has to work
with other ONVIF-compliant device.
Record* Record Configure the record function.
Record Timer Schedule recording for specific events..
Storage* Memory Check the current storage capacity and clear all recorded data when needed.
*Selected models only