Avtech 4713218633538, Operation Manual

Page: 25 / 59

20
3.7 Trigger
3.7.1 Trigger
You can configure how this camera reacts when there’s a PIR or motion event.

Detect
Item Description
Motion Enable or disable motion detection.
Motion detection is not supported when the stream format is Motion JPEG.
When “Enable” is selected, click “Detection” to enter the motion detection area setting page as follows:
Sensitivity:
Set the detection sensitivity from the drop-down list: High, Normal or Low.
Area Setting:
Set the motion detection area by selecting the area grids with your mouse. Pink grids represent the area that is not being
detected while the transparent grids are the area under detection. You can set multiple areas under detection.
Click “Clear All” to set the whole area undetected.
Click “Select All” to set the whole area under detection.
PIR* Enable (ON) or disable (OFF) PIR detection.
Duration Set the duration time for trigger recording (5 / 10 / 20 / 40 seconds).
* For selected models only

Action
Here defines how the camera delivers alerts to you for any event.
Item Description
E-Mail Select the event type you want to receive E-mail notifications when it occurs.
Then, click the title “E-Mail” (in blue) to choose the media type configured in “Camera”

“Video”, file format (AVC /
AVI), record internal (1~5 seconds), record time (1 ~ 5 seconds) and pre-alarm recording time (1 ~ 5 seconds) for
the event video clip.
The camera will send the captured video clip to the E-mail address(s) you assigned in “Network”

“Mail” once the
selected event type occurs.
FTP Select the event type you want to receive FTP notifications when it occurs.
Then, click the title “FTP” (in blue) to choose the media type configured in “Camera”

“Video”, file format (AVC /
AVI), record internal (1~5 seconds), record time (1 ~ 5 seconds) and pre-alarm recording time (1 ~ 5 seconds) for
the event video clip.
The camera will upload the captured video clip to the FTP site you assigned in “Network”

“FTP” once the
selected event type occurs.
SMS Select the event type you want to receive a text message when it occurs.
The camera will send a text message to the mobile phone number you assigned in “Network”

“SMS” once the
selected event type occurs.
Record*
Select the event type you want to record when it occurs.
* For selected models only