AVT MAGIC TBR, Hardware And Software Manual

Page: 22 / 67

THE WEB INTERFACE OF MAGIC TBR
22
3.1.2 Break-In configuration
Figure 10: Break-In Configuration
The system allows you to define up to four Break-In scenarios which can be
triggered either by TTL inputs (Ensemble 1: Pin 1 … Pin 4 respectively Ensemble 2:
Pin 5 … Pin 8 of the TTL interface, see Figure 6) or SNMP commands (see CHAPTER
3.1.9).
Scenario 1 has the highest and scenario 4 the lowest priority, respectively. In
general, a break-in can be cancelled by triggering Pin 1 (Pin 5 for Ensemble 2) only
with a short pulse (< 200 ms).
For test purposes a test scenario can be defined which can be triggered directly via
the Test button of the web interface (see Figure 7).
Each scenario can consist of:
• Live Audio content ( Live Audio Announcement ) with or without pre- or post-
jingle
• Pre-recorded Audio content (
File Announcement
) with or without pre- or
post-jingle
• Dynamic Label (DLS)