© 2021 AVSS
–
ALL RIGHTS RESERVED
33
PRS-M300 USER MANUAL FOR DJI M300 RTK
Step
16
Cycle PRS
Power
Turn the PRS OFF. Wait a moment and then turn the PRS back
ON. After a moment, the LED will blink purple and blue.
Step
17
Cycle PRS
Power
Again
Turn the PRS OFF. Wait a moment and then turn the PRS back
ON. Now the LED on the PRS should turn green once it has
finished initializing. Once the LED is green, the FTS has been
properly configured and is ready to use.
The LED will turn yellow if the manual trigger remote is not
connected.
Step
18
Process
Complete
Once the LED on the PRS is green, the setup process is complete.
Turn off the PRS, drone and manual remote in that order. The
USB-
C can now be unplugged from DJI assistant. Don’t forget to
reinstall the small silicon cover to protect the Assistant Port during
flight.
•
MAKE SURE ALL CONNECTORS ARE PROPERLY ATTACHED TO
THE FLIGHT TERMINATION SYSTEM AND PRS-M300.
•
DO NOT LEAVE METAL TERMINALS EXPOSED TO OPEN AIR
WHEN NOT IN USE.