AVSS PRS-M300 User Manual Download

Page: 37 / 46

–

PRS-M300 USER MANUAL FOR DJI M300 RTK

Firmware Updates

Firmware updates should be performed when a new version is released by AVSS. Check

the AVSS website regularly for firmware updates.

Updating the Firmware

Step 1

Download

firmware

Download the firmware from

the bottom of the page on

https://www.avss.co/product

s/prs-for-dji-m300-rtk/

Step 2

Copy the

firmware on a

SD card

Copy the firmware on a SD

card and insert in the PRS-

M300. Do not change the file

names of the Firmware.

Step 3

Firmware LED

The white LED indicates that

the

firmware

being

downloaded and, then, will

restart. If there is an issue, the
LED will go Red.

Step 4 Turn on the PRS-

M300

The firmware will be updated

automatically on start-up.

Step 5

Turn on the

manual

triggering device

The manual triggering device

firmware will be updated on

the first communication.

LED TURNS OFF WHILE INSTALLING THE NEW FIRMWARE. DO

NOT POWER OFF THE MODULE UNTIL THE LED INDICATOR
COMES BACK ON.

Summary of Contents for PRS-M300














































Search results

Summary of Contents for PRS-M300

Reviews:

Related manuals for PRS-M300

Brands by name

Popular brands

AVSS PRS-M300, User Manual

Search results

Summary of Contents for PRS-M300

Reviews:

Related manuals for PRS-M300

Brands by name

Popular brands